1/26/2024 0 Comments Darto fireside bowlCams A closer look at the Spectra_E's two draw stops. So there are three points of contact pulling down on each axle, creating more stability and consistency. Instead of simply having the two yokes pulling down on the outside of each limb, there’s also a cable attached to the cam at the axle. A cable is then connected to the other end of the roller, and that cable is attached to the opposite cam as usual.Įssentially, the E system evens out the pressure on each axle. With the E system, the yokes form that single cable, but it’s then turned around through the roller to connect right back to the cam in between those yokes. Normally when you see split yokes on a compound, the yokes come together below the top cam or above the bottom cam to form a single cable that attaches to the opposite cam. It’s a roller at the upper end of the cables that takes a split yoke attached to each limb tip and connects that cable back to the cam in between the yokes. What’s unique about the Spectra E-something you won’t see on any other compound-is Darton’s E system. The more vertical limbs are on a compound bow, the more hand shock the shooter feels. In making the new Spectra E, Darton also built a wider limb pocket filled with wider limbs, and they flattened those limbs to make them more parallel. And that leads to consistency from shot to shot, and minimal vibration-that hand shock I didn’t like about the previous version. It’s also pre-stressed and pre-stretched.Īll of that adds up to a riser that has very little flex. Those numbers and letters are Greek to most of us, but it has one of the highest strength-to-weight ratios and stiffness-to-weight ratios on the market. It’s made of a grade of aluminum classified as 7075 T-6511. The backbone of the Spectra E is the aluminum riser. Although they kept the same name, Kitts and Darlington overhauled the bow and came back with a new version for 2022. I didn’t like the 2021 version because it had too much hand shock. The 2022 Spectra E is a revised version of a bow of the same name Darton built in 2021. What Darton needs now is the name recognition it had 30 years ago. But Kitts is now breathing new life into the Darton brand in hopes of bringing it back to market relevance. Darlington still works for the company doing what he loves-tinkering with new designs. In 2020, Randy Kitts, who owns Black Eagle Arrows and Conquest Stabilizers, decided to add a bow to his archery portfolio and acquired Darton from Darlington. It might seem like Darton bows disappeared, but they didn’t. The three-track, binary cam system we see increasing in popularity today was first patented by Darton back in 2003.Īnd while Darlington helped fuel the speed craze of the early to mid-2000s with his engineering, Darton got caught on the wrong side of the marketing avalanche that boosted bow makers like Mathews and Hoyt. Former owner Rex Darlington helped shape the compound bow as we know it today.Įvery compound bow you see in pro shops across the country has either a part patented by Darlington or a part inspired by a Darlington patent-especially in the cams. Darton was one of the most common brands on the shelf. If you shot hunting compound bows in the 1980s and 1990s, then you know the Darton Archery name well. The History of Darton Archeryīefore we dive into the features and capabilities of the Darton Spectra E, let’s talk archery history. It just doesn’t have the name recognition. And even if you know the Darton name, you probably haven’t heard much-if anything-about the Darton Spectra E bow.Īnd that’s a shame, because the Spectra-E is a sweet-shooting compound bow that can hold its own with any of the new flagship hunting bows. Unless you’re an industry gadfly or you’re over the age of 45, you’re probably not too familiar with the name Darton. We may earn revenue from the products available on this page and participate in affiliate programs.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |